6 Easy Ways to Fix Ultimate ears speaker not charging

If your ultimate ears speaker is not charging, there are a few things you can try in order to get it working again.

First, check the charging port for any dirt or debris that may be preventing the charger from making a good connection. If the port is clean, then try plugging the charger into a different outlet to see if that makes a difference.

If the speaker still refuses to charge, then it may need a factory reset. To do this, simply press and hold down the power button and volume button for 10 seconds.

The speaker should turn off and then back on again, at which point it should begin charging as normal.

How to fix Ultimate ears speaker not charging issue?

1. Faulty Charging Cord or Outlet

One possible reason your Ultimate Ears speaker may not be charging is because the charging cord or outlet is faulty. If you have another cord or outlet that you can try, plug in your speaker and see if it charges.

If the other cord or outlet doesn’t work either, then the problem is likely with your speaker. To fix this, you’ll need to replace the charging cord or outlet. You can find replacement charging cords and outlets online or at a local electronics store.

Once you’ve replaced the cord or outlet, your speaker should charge properly. If it still doesn’t charge, then there may be another issue with your speaker that you’ll need to troubleshoot.

2. Factory reset your Ultimate ears speaker

If you’re having trouble charging your Ultimate Ears speaker, one thing you can try is resetting the speaker to its factory settings.

To do this, press and hold the both the power button and volume down button for 10 seconds.

The speaker will then restart and should begin charging normally. If the problem persists, however, it’s likely that there is a more serious issue with the speaker’s battery.

In this case, it’s best to contact Ultimate Ears customer support for further assistance.

3. Faulty USB Port

If you’re experiencing charging issues, it’s likely that your speaker’s USB port is damaged and needs to be replaced. This guide will show you how to replace the USB port on your Ultimate Ears speaker. You’ll need a Phillips screwdriver and a knife or other sharp object.

To begin, unscrew the two screws on the back of the speaker using a Phillips screwdriver. Next, carefully pry off the back panel with a knife or other sharp object. Be careful not to damage the panel as you pry it off.

Once the back panel is removed, you should see the speaker’s circuit board. Locate the USB port on the board and carefully desolder it using a soldering iron and solder wick.

Next, take your replacement USB port and solder it onto the board in the same place as the old port. Make sure that all of the pins are properly aligned before soldering them in place.

Once the new port is soldered on, replace the back panel and screw it into place. Your speaker should now charge properly when connected to a power source via USB.

4. Replace battery

If your Ultimate Ears speaker is not charging, the problem may be with the battery. In most cases, simply replacing the old battery with a new one will fix the issue.

However, it’s important to choose the right type of battery for your speaker. Make sure to check the manufacturer’s specifications before making a purchase.

Once you have the new battery, follow the instructions carefully to avoid damaging the speaker. With a little effort, you should be able to get your speaker working again in no time.

5. Use the right charger for your Ultimate ears speaker

If you’re having trouble getting your Ultimate Ears speaker to charge, it might be because you’re using the wrong type of charger.

The standard micro USB charger that comes with most phones and other devices won’t work with the Ultimate Ears speaker.

You’ll need to use the special UE charging dock that comes with the speaker, or a similar charger. Once you have the right charger, simply connect it to the speaker and plug it into an outlet.

The charging indicator on the speaker should light up, indicating that it’s receiving power. If your speaker still isn’t charging, there may be another issue preventing it from doing so.

6. Remove water from inside

If you accidentally drop your UE speaker in water, it’s important to remove the water as quickly as possible to prevent damage. The best way to do this is to take the speaker apart and remove the battery.

Once the battery is removed, you can then use a vacuum cleaner with the hose attachment to suck out any remaining water. If you don’t have a vacuum cleaner, you can also use a hair dryer on the low setting to remove the water.

Once all of the water has been removed, you can then reassemble the speaker and try charging it again. With any luck, your speaker will now charge properly.

Conclusion

If your Ultimate Ears speaker isn’t charging, there are a few things you can do to troubleshoot the issue.

First, check the charging port for any debris or damage. If that doesn’t fix the problem, try using a different charging cable or plugging the speaker into a different outlet.

Finally, if none of those solutions work, reset the speaker by holding down the power button and volume button for 10 seconds. If your speaker still won’t charge after trying all of these things, contact customer support for further assistance.