7 Ways To Fix Ultimate Ears Not Connecting

One of the most frustrating things that can happen when you’re trying to enjoy music is having your speaker not connect to your device.

It’s even more disappointing when you realize that the reason it’s not working is that the two aren’t in close range to each other. If you’re wondering why your Ultimate ears speaker isn’t connecting, this is most likely the answer.

While it’s possible that there’s another problem, such as a loose connection or damaged wire, chances are that you simply need to move your speaker closer to your device.

Once they’re in close range, you should be able to enjoy your music without any issues.

How to fix Ultimate ears speaker not connecting

1. Make sure Ultimate ears speaker is turned on

Before you go through the process of troubleshooting your speaker, make sure that it is turned on. It may seem like an obvious solution, but sometimes the simplest solutions are the best.

Once you have verified that the speaker is turned on, check to make sure that it is properly connected to your device.

If none of these solutions work, you may need to contact customer service for further assistance. Troubleshooting your speaker can be a simple process as long as you take the time to follow each step carefully.

2. Make sure your device is paired

If you’re still having trouble connecting your Ultimate Ears speaker to your device, there are a few things you can try.

First, make sure that your speaker is turned on and within range of your device. If it’s still not connecting, try restarting both your speaker and your device. You may also need to unpair and then re-pair the two devices.

To do this, go to the Bluetooth settings on your device and select “forget” or “unpair” from the list of paired devices. Then, try pairing them again from scratch.

If you’re still having trouble connecting, it’s possible that there is an issue with your speaker or your device’s Bluetooth connection. In this case, it may be necessary to consult the user manual or contact customer support for further assistance. 

3. Place your Bluetooth device closer to the speaker

Next, make sure that the speaker is powered on and that your device is in range. If you’re still having trouble, try restarting both the speaker and your device.

You should also check to see if there are any firmware updates available for your speaker.

4. Move your speaker away from other Bluetooth devices

Sometimes bluetooth connections can be temperamental, and one common problem is that a speaker will refuse to connect to a phone or other device. 

If you’re having trouble connecting your Ultimate Ears speaker to your bluetooth device, the first thing to try is moving the speaker away from any other bluetooth devices that might be in range. 

Bluetooth relies on radio waves to transmit data, and if there are too many devices competing for the same frequency, it can cause interference and prevent a connection from being established. 

By moving the speaker away from other Bluetooth devices, you can reduce the amount of interference and improve the chances of establishing a successful connection.

5. Factory reset your speaker

To factory reset your speaker, first make sure it is turned off.

Then, press and hold the power button and volume down button for about 10 seconds until you see the light on the front of the speaker turn off and on again. Once the light is on, release the button and your speaker will be reset.

If your speaker still does not connect after resetting it, try connecting it to a different device or moving it closer to the Bluetooth source. If you are still having trouble, contact Ultimate Ears customer support for assistance.

6. Make sure your UE speaker is in pairing mode

If you’re having trouble connecting your UE speaker to your device, make sure that the speaker is in pairing mode.

To do this, press and hold the Bluetooth button on the speaker for about three seconds. The Bluetooth light will start blinking rapidly, indicating that the speaker is in pairing mode.

Once the speaker is in pairing mode, go to your device’s Bluetooth settings and select the UE speaker from the list of available devices. Once you’re connected, you should be able to hear audio from your device through the speaker.

7. Too many Devices Connected

When it comes to Bluetooth speakers, most people focus on the sound quality or the portability. However, another important factor to consider is the number of devices that can be connected at once.

Some speakers only allow for a single connection, while others can support multiple devices. The Ultimate Ears Boom 3 is one of the few speakers that offers true multi-device support, allowing up to two devices to be connected at once.

This means that you can have multiple people control the speaker without any compromising on quality or range.

However, it’s important to note that too many devices connected at once can cause connectivity issues. If you’re experiencing dropouts or skipping, try disconnecting some of the devices and see if that improves performance.

Conclusion

If you’re having trouble connecting your Ultimate Ears speaker to your device, make sure that they’re in close range. Once they are, you should be able to enjoy your music without any issues.