JBL Flip 6 won’t turn on – [SOLVED]

JBL Flip 6 speaker is a great sounding device, it produces clear and balanced audio. However, some users have been experiencing issues with their JBL Flip 6 not turning on. There are a few reasons why your JBL Flip 6 might not be turning on.

The most common reason is that the circuit board has gone faulty. This can happen due to a power surge or simply due to wear and tear over time. If this is the case, then you will need to get the circuit board replaced in order to get the speaker working again.

Another possibility is that the battery is not charged. If you’ve been using the speaker regularly, then it’s possible that the battery has drained and needs to be recharged. Simply plugging the speaker into a power source should do the trick.

In this article, we’ll cover some of the most common reasons why your JBL Flip 6 won’t turn on, as well as how to fix them. Stay tuned!

How to fix JBL Flip 6 that won’t turn on?

If your JBL Flip 6 won’t turn on, there are a few things you can try to fix the problem.

First, check to make sure that the speaker is adequately charged. If the speaker is low on battery, it may not have enough power to turn on. In this case, simply plug the speaker into a power outlet and allow it to charge for a few minutes.

If the speaker still doesn’t turn on, Reset the speaker by pressing and holding the Power button for 10 seconds. This will often fix any software issues that may be causing the speaker to malfunction.

If resetting the speaker doesn’t work, there may be an issue with the hardware. In this case, it’s best to contact JBL customer service for further assistance.

How do you reset a JBL Flip 6?

To reset a JBL Flip 6, press and hold the Bluetooth button for about 10 seconds until you hear a voice prompt asking if you want to reset the system. Press the Bluetooth button again to confirm.

The system will then restart and be ready to pair with your device. If you have any trouble resetting your system, consult the user manual for more detailed instructions. As long as you follow the steps above, you should have no problem resetting your JBL Flip 6.

Other possible reasons for JBL Flip 6 not turning on

Here are some other possible reasons that cause JBL FLIP 6 to not turn on:

1. Power Button Is Broken

One possible reason for JBL Flip 6 not turning on is that Power Button Is Broken. The power button may be jammed or the mechanism may be damaged. If the power button is stuck, you can try to use a paperclip or other sharp object to press the reset button. If the power button is broken, you will need to replace it. You can find replacement parts on the internet or at a local electronics store. 

2. Power button is dusty

JBL Flip 6 not turning on can be frustrating, especially when you want to listen to your favorite music. There are several reasons why this may happen, and one possible reason is that the power button is dusty.

When the power button is pushed, it sends a signal to the speaker to turn on. If the button is covered in dust, that signal may not be able to get through. To fix this, simply clean the power button with a soft cloth.

You may also want to check the battery level to make sure that it is charged. If neither of these solutions works, there may be a more serious problem with the speaker and you should contact customer service for assistance.

3. The Device Is Not Charged

If your JBL Flip 6 won’t turn on, one possible reason is that the device is not charged. Usually, when you plug in your JBL Flip 6 to charge, a red light will appear on the speaker to indicate that it’s charging.

Once it’s fully charged, the red light will turn off. If you don’t see a red light when you plug in your JBL Flip 6, it may not be getting power and needs to be replaced.

Another possibility is that the battery is simply dead and needs to be replaced. If you’ve tried charging your JBL Flip 6 and it still won’t turn on, contact customer support for further assistance.

How do I test my JBL Flip 6 battery?

Before you can test your JBL Flip 6 battery, you will need to gather the following materials: a digital multimeter, JBL Flip 6 speaker, and an AC power adapter. Once you have all of your materials, you will need to follow these steps:

1. Power off your JBL Flip 6 speaker and unplug it from any power source.

2. Locate the battery compartment on the back of the speaker. Using a Phillips head screwdriver, remove the screws that secure the cover in place.

3. Gently pull the cover away from the speaker to reveal the battery.

4. Using your digital multimeter, set it to the “DC Voltage” setting. Touch the black lead to the negative terminal on the battery, and touch the red lead to the positive terminal.

5. If the reading is within the normal range for a fully charged JBL Flip 6 battery (3.7-4.2 V), then your battery is fine. However, if the reading is below 3.7 V, then your battery is low and needs to be recharged.

By following these simple steps, you can easily test your JBL Flip 6 battery at home to see if it needs to be recharged.

Conclusion

It’s possible that there are several reasons why your JBL Flip 6 won’t turn on. The most common reason is that the circuit board has gone faulty and needs to be replaced.

Another possibility is that the battery is not charged. If you’ve been using the speaker regularly, then it’s possible that the battery has drained and needs to be recharged. Simply plugging the speaker into a power source should do the trick.