jbl clip 2 not pairing

JBL Clip 2 Not Pairing [Fixed]

Bysyed fahad

If your JBL Clip 2 not pairing with your device you should not worry about this because there are many ways to fix them. Here is how you can fix JBL Clip 2 pairing problem.

Make sure your device is discoverable. You can check that by going to settings and Bluetooth. Also, make sure your JBL Clip 2 is in pairing mode and is discoverable. Then try to connect them with any device.

However, this did not fix the pairing issue of the JBL Clip 2 speaker. Then read on we did research to find out why they don’t pair and how to fix them. So, try every possible solution hopefully they will pair.

How to fix JBL Clip 2 not pairing

The process has gone wrong

Maybe you tried to pair your JBL Clip 2 but the process has gone wrong. Therefore you should again try to pair them with your device.

Here is how you can pair your JBL Clip 2.

  1. When JBL Clip 2 is in power mode, onetime push the Bluetooth button. 
  2. Under the JBL Bluetooth button, the white light will start to glow  
  3. Then come on your smartphone and open the Bluetooth setting on your phone. 
  4. On your mobile screen tap the name of JBL Clip 2 and connect to the speaker pair. 

Reset JBL Clip 2

If your JBL Clip 2 not pairing with any device you should reset it. And try to pair it with your Bluetooth device.

Here is how you can reset your JBL Clip 2.

  1. Turn on JBL Clip 2 then press and hold the volume + and call button at the same time. 
  2. After this, the speaker releases the noisy volume sound, and the JBL Clip 2 light will begin flashing fast. 
  3. After a few seconds, the JBL Clip 2 will be powered off, and then you will turn it on again. 
  4. Now it is reset.

Great! Now JBL Clip 2 has been reset. It is in pairing mode, and all the issues are resolved. 

JBL Clip 2 and device range

The JBL Clip 2 speaker connects to the mobile or any device via Bluetooth. For the best connection, its range should be up to 30 meters without any deterrence.

If you are out of the range the speaker says that the device is not in range. Be sure your device should be in the range then try to pair it.

Enable and disable Bluetooth

If your JBL Clip 2 is not pairing with any device then you should enable and disable that device’s Bluetooth.

And then try to pair your JBL Clip 2 with it. However, if the issue still persists then you should turn on and off Bluetooth three to four-time.

Then try to pair.

Restart your device

Another reason may be glitches in your mobile phone that JBL Clip 2 is not pairing with it. Therefore you should restart your android or iOS device.

To restart an android phone press and hold the power button for 5 to 10 seconds.

A menu will appear on the screen from there select reboot or restart. 

To restart or reboot your iPhone press and hold the volume button and side button until the slider appears.

Then drag the slider and wait for 30 seconds for the device to turn off. Turn it on again with the side button.

Device compatibility

The goodness of the JBL speaker has the ability to connect with any device. But the Bluetooth should be compatible with other devices.

Sometimes you can face a situation where the devices have non-compatible software and different version,

In this situation device and Bluetooth won’t work with each other. 

Final Thoughts

If none of the above solutions work for you then you should contact JBL customer support to ask for advice. Or you can also replace your JBL Clip 2 if they are under warranty.

How to pair JBL Clip 2 with the android device? 

Here is how you can pair JBL Clip 2 with your Android device.

  1. Your JBL Speaker should be turned on. 
  2. Open the android mobile setting and go to the Bluetooth option. 
  3. Tap on the Bluetooth point and then your mobile phone will scan the all nearest devices for Bluetooth connection. 
  4. The mobile screen will show the name of JBL Clip 2, click on this name. 
  5. Finally, the speaker recreates a verification sound that means the phone and device are connected.

How to pair JBL Clip 2 with iPhone? 

Here is how you can pair JBL Clip 2 with your iPhone.

  1. Turn on your JBL Clip 2. 
  2. Open the iPhone setting and go to the Bluetooth option. 
  3. Tap on the Bluetooth point and then your iPhone will scan the all nearest devices for Bluetooth connection. 
  4. The iPhone screen will show the name of JBL Clip 2, click on this name. 
  5. Finally, the speaker recreates a verification sound that means the iPhone and device are connected.

JBL Clip 2, not charging [Fixed]

JBL Charge 3 Won’t Pair

Similar Posts