Fix JBL charge 4 keeps skipping – Explained for Beginners

JBL Charge 4 is an excellent Bluetooth speaker that keeps skipping. Many people have reported this issue and there seems to be no clear solution.

One reason why your JBL Charge 4 might keep skipping is incompatibility with the audio source. If you’re using a Bluetooth connection, make sure that the devices you’re using are compatible with the speaker.

If you’re using a wired connection, make sure that the cables are properly plugged in and that the audio source is compatible with the speaker.

In this blog post, we will explore the possible reasons why this might be happening and potential solutions. Keep reading to find out more!

Why does my JBL charge 4 speakers keep skipping?

One reason your JBL Charge 4 speaker might keep skipping could be interference from other devices. If you’re using the speaker indoors, try moving it away from other electronics like TVs, microwaves, and computers.

If you’re using the speaker outdoors, make sure it’s not too close to other devices that use Bluetooth or WiFi. Interference from other devices can cause the signal from your speaker to become weak or erratic, which can cause the speaker to skip.

Another possible reason for skipping could be a low battery. If the battery is low, the speaker may not have enough power to keep playing consistently. Try charging the speaker for a few hours before using it again. If the problem persists, contact JBL customer service for further troubleshooting.

Other reasons for JBL charge 4 keeps skipping

Here are some other possible reasons why JBL charge 4 keeps skipping:

1. Bluetooth range

JBL charge 4 keeps skipping can be frustrating, but there are some possible explanations. One is that the device is outside of the Bluetooth range.

While most Bluetooth devices have a range of about 30 feet, obstructions like walls can reduce this significantly. If the JBL Charge 4 is more than a few feet from the source device, it may start to skip.

Another possibility is that there are too many devices connected to the same Bluetooth source. Most devices can only handle a limited number of connections at one time, so adding too many devices can cause problems.

2. The Bluetooth app has a bug

JBL charge 4 keeps skipping is a common problem that many users face. There can be various reasons for this problem, but one possible reason is that the Bluetooth app has a bug.

The Bluetooth app is responsible for managing the connection between the device and the JBL speaker. If there is a bug in the app, it can cause the connection to break down, resulting in the speaker skipping.

3. Speaker is defective

Another possible reason for the problem is that the speaker itself is defective. In some cases, a manufacturing defect can cause the speaker to skip when playing music.

If you are experiencing this problem, you should try troubleshooting by resetting the speaker or updating the firmware. If these methods do not work, you may need to contact JBL customer service for assistance.

How to fix JBL charge 4 keeps skipping

1. Check the Bluetooth connection

If your JBL Charge 4 keeps skipping, the first thing you should check is the Bluetooth connection. Make sure that your speaker is properly connected to your device and that there are no interruptions in the signal.

If you’re using your speaker outdoors, try moving it closer to your device to avoid any potential interference from other electronic devices or objects.

2. Check the battery level

If your JBL charge 4 keeps skipping, the first thing you should check is the battery level. If the battery is low, it may not have enough power to stream music continuously.

You can check the battery level by pressing the power button for three seconds. If the LED light is solid white, the battery is fully charged. And If it’s solid red, the battery is low. If it’s flashing red, the battery is critically low and needs to be recharged. Once you’ve checked the battery level, try playing your music again.

3. Update the firmware

If you’ve been using your JBL Charge 4 for a while and you’ve noticed that it’s started to skip more often, it might be time for a firmware update. Although the Charge 4 is a reliable speaker, like any piece of technology, it can start to experience problems after extended use.

Fortunately, updating the firmware is a relatively simple process that just requires a few steps.

• First, make sure that your Charge 4 is turned off and connected to a power source.
• Next, go to the JBL support website and download the latest firmware update for your speaker.
• Once the update has been downloaded, unzip the file and drag it onto your Charge 4.
• Finally, press and hold the power button for three seconds to begin the update process. After a few minutes, your Charge 4 should be updated and ready to use.

4. Reset the speaker

If your JBL Charge 4 keeps skipping, try resetting the speaker. To do this, press and hold the power button for 10 seconds. The speaker will then turn off and reset. This should fix the problem.

If not, you may need to factory reset the speaker. To do this, press and hold the power button for 20 seconds. The speaker will then turn off and reset to its factory settings. This should fix the problem. If your JBL Charge 4 still keeps skipping, contact customer support for further assistance.

5. Contact JBL customer support

If your JBL Charge 4 keeps skipping, the best thing to do is to contact JBL customer support. They will be able to help you troubleshoot the problem and determine whether it is a hardware or software issue.

In some cases, they may be able to provide you with a replacement unit. However, if the problem persists, they may recommend that you return the unit for a refund or exchange. Regardless of the cause, if your JBL Charge 4 keeps skipping, customer support should be your first point of contact.

Conclusion

It seems that many people are having trouble with their JBL Charge 4 skipping. There could be a number of reasons for this issue, but the most likely culprit is an incompatibility between devices. Make sure that your audio source and speaker are compatible before trying any other solutions. If you’re still having problems, reach out to customer service for help.