JBL Charge 3 Won’t Turn on [After Reset or Firmware Update]
Typically JBL charge 3 speakers will turn on when you press the power button. But sometimes due to glitches in it, it won’t turn on.
So, if your JBL charge 3 speakers not turning on you don’t need a special skill to fix it. You can try some simple steps to fix it.
In this article, you will know how to fix your JBL charge 3 that won’t turn on or won’t turn on after reset and firmware update.
Let’s get started!
How to Fix JBL Charge 3 Won’t Turn On
Won’t turn on after the reset
If your JBL Charge 3 won’t turn on after the reset. Then might be they are not turning on due to a faulty battery.
First, you check whether the battery is fully charged or not. If not then plug the charger into your charge 3 speakers and then try to turn it on.
If it turns on with this then you should leave it to charge fully. However, if this method doesn’t work you should your speaker’s firmware.
However, if it is not working after the firmware update then move on to the next method.
Won’t turn on after the firmware update
So, if your JBL charge 3 speakers won’t turn on after the firmware update you should perform a hard reset.
You can return them if you have their serial number and warranty.
Let’s first try hard reset.
- Turn on the speaker by pressing and holding the power button.
- Press Bluetooth and volume up buttons at the same time until the speaker turns off.
- Turn on the speaker by pressing the power button.
If the hard reset did not work for your JBL charge 3. Then press the power button repeatedly 3 to 8 times and hold it at 8th time or until it turns on.
With this many people have fixed their Bluetooth speakers that were not turning on after the firmware update.
Charge properly
Sometimes JBL Charge 3 won’t turn on due to improper charging. It gives a good response if we care about it.
Proper battery charge is a factor that gives us a positive response after the reset and updates of the firmware.
If we do not charge the proper battery and use it continuously at the ending points. The battery of JBL Charge 3 will be faulty very soon.
The faulty battery can be replaced.
Speaker does not charge properly it might be the issue with the charging cable, check your charging cable. If it is damaged then change it.
Check battery
If the JBL Charge 3 won’t turn on, maybe the speaker has lost its battery.
In this case, changing the battery is the best way to turn on your speaker. Otherwise, your JBL Charge 3 won’t turn on without a plugin.
The JBL speakers can play music without battery power. For this, your speaker will always plug into the charge port.
Further, you can purchase the battery portable pack and connect it to your speaker.
JBL Charge 3 has a 6000 mAh capacity battery that contains Li-ion polymer. If it is fully charged it will remain continuously for 22 hours of playtime.
Some of the basic points where the battery will be lost very soon.
- To save your battery, when the speaker is fully charged then unplug it.
- Don’t keep it in direct sunlight.
- Do not store above 60C.
Faulty power button
First, you should check your speaker battery whether or not it is fully charged. If it is fully charged and the speaker stays off then it power button may be faulty.
If the power button of the JBL Charge 3 Speaker does not work, you can repair this button easily at your home.
Most of the time speaker’s power button doesn’t work due to dirt on it. Therefore use the air pressure to remove the dirt inside the buttons.
And try to turn your speaker on again with the button.
Bose Soundbar 700 Won’t Turn On
How do I turn on my JBL Charge 3?
To turn on the JBL charge 3 speaker is really easy.
Here is how you can do that.
To turn it on press and hold the power button for a few seconds. A white LED will flash which means your speaker has been turned on.
