How to Fix Tribit StormBox Speaker not turning on

If you’re a fan of high-quality sound and portability, you may have considered investing in a Tribit Tribit StormBox Bluetooth speaker. This speaker is known for its excellent audio and long battery life, making it a popular choice for on-the-go music lovers.

However, sometimes users encounter a problem where the Tribit StormBox speaker will not turn on. This can be frustrating and make it difficult to use the speaker.

In this troubleshooting guide, we’ll explore the potential causes of this issue and provide solutions to fix it.

Potential Causes of the StormBox Not Turning On

Before we dive into the troubleshooting steps, it’s important to understand the potential causes of the Tribit StormBox speaker not turning on problem. Here are a few possibilities:

1. Discharged battery: If the Tribit StormBox’s battery is completely drained, it will not have enough power to turn on. This can happen if the StormBox speaker has not been used for an extended period of time, or if it was used extensively without being charged. To resolve this issue, you can try charging the StormBox’s battery and then attempting to turn it on again.
2. Firmware glitch: A firmware glitch occurs when there is an issue with the software that controls Tribit StormBox’s hardware. This can cause the StormBox to behave unexpectedly, including not turning on. To resolve this issue, you may need to update StormBox’s firmware to the latest version.
3. Faulty speaker circuit: The speaker circuit is responsible for powering the Tribit StormBox’s speakers and allowing them to produce sound. If this circuit is damaged, it may prevent the StormBox from turning on. To resolve this issue, you may need to have the Tribit StormBox repaired by a professional or contact the manufacturer for assistance.

Technical Specifications of the Tribit StormBox

Before we get into the troubleshooting steps, let’s review the technical specifications of the StormBox speaker . Understanding the capabilities and limitations of your speaker can be helpful when troubleshooting issues.

• Bluetooth version and profiles: The StormBox uses Bluetooth 5.0 technology and supports the A2DP, AVRCP, and HSP profiles.
• Driver and output power: The Tribit StormBox has two full-range drivers and a passive radiator, with a total output power of 24W.
• Signal-to-noise ratio and frequency response: The Tribit StormBox has a signal-to-noise ratio of 80 dB and a frequency response of 80 Hz to 20 kHz.
• Battery life and charging time: The StormBox has a battery life of up to 24 hours, depending on volume and usage. It takes about 4 hours to fully charge the battery.
• Dimensions and weight: The StormBox measures 7.6 x 2.6 x 2.6 inches and weighs 1.3 pounds.

Troubleshooting Steps to Fix StormBox Not Turning On

If your StormBox speaker is not turning on, don’t despair! There are several troubleshooting steps you can try to fix the problem. Follow these solutions in the order listed, testing the speaker after each step to see if it has resolved the issue.

Solution 1: Perform Factory Reset

If the Tribit StormBox speaker is not turning on, one of the first things you should try is performing a factory reset. This can often fix issues with the speaker by clearing any glitches or settings that may be causing problems. Here’s how to reset the StormBox:

1. Press and hold the volume up and volume down buttons simultaneously for 10 seconds.
2. The speaker will beep and the LED indicator will flash. When you hear the beep, release the buttons.
3. The speaker will reset and the LED indicator will stop flashing.

Solution 2: Charge the Speaker

If the battery is completely drained, the Tribit StormBox speaker will not turn on. To charge the speaker, follow these steps:

1. Connect the included micro USB cable to the StormBox’s charging port.
2. Plug the other end of the cable into a power outlet or charging device.
3. The LED indicator will turn red, indicating that the speaker is charging.
4. It takes about 4 hours to fully charge the StormBox.

Solution 3: Replace Faulty Battery

If the battery is not holding a charge or is not functioning properly, the Tribit StormBox will not turn on. If you’ve tried charging the speaker and it still won’t turn on, it may be time to replace the battery. You can purchase a replacement battery from the manufacturer or a third-party supplier. To replace the battery, you will need to disassemble the speaker and locate the battery. Follow any instructions provided with the replacement battery for installation.

Solution 4: Repair Faulty Circuit Board

If the circuit board inside the Tribit StormBox speaker is damaged, the speaker may not turn on. In this case, you will need to repair or replace the circuit board. This is a more advanced solution and may require the assistance of a professional or the manufacturer.

Solution 5: Check Power Source

If the Tribit StormBox speaker is not turning on, it’s possible that there is an issue with the power source. Here are a few things to check:

• Ensure that the power outlet is functioning properly by plugging in another device.
• Make sure that you are using the correct power adapter for the Tribit StormBox. The adapter should be rated at 5V 2A.

Solution 6: Check for Physical Damage

If the Tribit StormBox speaker has been dropped or subjected to rough handling, it may have suffered physical damage. Inspect the speaker for any visible damage, such as cracks or water damage. If you find any damage, it may be necessary to repair or replace the speaker.

Solution 7: Check Bluetooth Connection

If the StormBox speaker is not turning on, it’s possible that there is an issue with the Bluetooth connection. Here are a few things to try:

• Make sure that the speaker is properly paired with the device it is connected to.
• Reset the Bluetooth connection on both the speaker and the device by forgetting the connection and re-pairing.

Solution 8: Update Firmware

If the StormBox speaker is not turning on, it’s possible that the firmware is out of date or causing issues. To check for updates and update the firmware, follow these steps:

1. Visit the manufacturer’s website and check for available firmware updates for the StormBox.
2. Download and save the update file to your computer.
3. Connect the StormBox speaker to your computer using the included micro USB cable.
4. Follow the instructions provided by the manufacturer for installing the firmware update.

Solution 9: Reset to Default Settings

If the Tribit StormBox speaker is not turning on, it’s possible that the settings have been changed in a way that is causing issues. To reset the speaker to its default settings, follow the manufacturer’s instructions.

Solution 10: Contact Customer Support

If you’ve tried all of the above solutions and the StormBox speaker still will not turn on, it’s time to contact the manufacturer’s customer support for further assistance. They may be able to provide additional troubleshooting steps or offer repair options.

Conclusion

We hope that this troubleshooting guide has helped you fix the Tribit StormBox speaker not turning on problem. If you’ve followed these steps and the speaker still will not turn on, it may be necessary to bring the speaker to a service center for repair.

Don’t forget to visit TheDroidGuy Youtube channel for more troubleshooting videos and advice. With a little patience and persistence, you should be able to get your Tribit StormBox speaker working again and enjoying your favorite tunes in no time!