How to Bypass Charging Port on Bluetooth Speaker

Are you tired of constantly having to charge your Bluetooth speaker? Don’t let a faulty charging port hold you back from enjoying your music.

In this blog post, we’ll explore different methods for bypassing your speaker’s charging port, regardless of whether it’s a regular DC port or a +5V USB port. From the tools you’ll need, to the step-by-step instructions, we’ve got you covered.

But be warned, some of the solutions may require soldering, so make sure you have the necessary skills and experience before attempting any repairs. Don’t let a charging port problem keep you from enjoying your music, read on to learn how to bypass it.

How to Bypass a Regular DC Charging Port

If you are experiencing issues with the built-in DC charging port on your Bluetooth speaker, there are several ways to bypass it and continue charging the device.

1. Use the USB port on your speaker

The first method is to utilize the USB port on your speaker.

All modern Bluetooth speakers come equipped with a built-in USB port, so it is likely that your speaker has one as well. The first step in this process is to identify the type of USB port on your speaker. This can be a USB type A, Micro USB, or USB type C.

Once you have identified the port type, you will need to acquire the appropriate cable to connect your Bluetooth speaker to a cell phone charger or the USB port on your computer. This method can be used to bypass a faulty charging port on any Bluetooth speaker.

It is important to note that if your Bluetooth speaker has a powerful battery, it may take longer to charge via a regular USB port as the USB port can only deliver a maximum of 5V of power. Overall, this is a simple and effective way to bypass a regular DC charging port on your Bluetooth speaker.

2. Repair or replace the DC charging port on your speaker

Alternatively, if you think you can fix your faulty charging port via a DIY method, you can repair it as well. To repair or replace the DC charging port on your Bluetooth speaker, you can follow these steps:

1. Inspect the speaker and remove any screws you find. This will give you access to the internals of the speaker.
2. Carefully disassemble the housing of the speaker without breaking anything. This will allow you to access the charging board and the faulty charging jack.
3. Locate the charging board and the faulty jack. Inspect the jack for any defects.
4. If the issue is with the connections, resolder any faulty leads and connections to the board. This can fix any loose or corroded connections.
5. If the damage is greater, remove the charging jack by desoldering it. This will require soldering equipment and experience.
6. Solder a new and compatible jack in place of the old one. Make sure the new jack is compatible with your speaker and that it is properly soldered in place.
7. Reassemble the speaker, together with all the screws. Make sure everything is securely in place before powering on the speaker.

It’s important to note that this process requires some technical knowledge and experience with soldering and electronic components. If you’re not comfortable with this, it’s best to consult a professional.

What to do if you can’t find a suitable replacement jack?

If you are unable to find a suitable replacement jack for your DC charging port, you can try and solder the charger’s positive and negative wires directly onto the board’s leads. To do this, you need to follow the steps below:

1. Disassemble the speaker by unscrewing it, locate the charging jack.
2. Desolder the charging jack to remove it.
3. Identify the positive and negative leads on the board by looking for any lettering that says “+” or “-”
4. Strip the charger wires, and differentiate the positive and negative wires by identifying the wire with a stripe or marking on it.
5. Apply solder to the wires, then solder the positive wire to the positive lead and the negative wire to the negative lead on the main board.
6. Secure the wires inside the speaker’s housing by tying them into a knot
7. Reassemble the speaker by screwing it back together

How to Bypass a USB Type Charging Port

If you suspect that the USB charging port on your Bluetooth speaker is faulty, there are a few things you can do to bypass or fix the issue. The first step is to determine if the charger itself is working properly. If the charger is functioning correctly, then the issue may be with the USB port itself.

1. Fix or replace the USB charging port

One solution to this problem is to disassemble the speaker and locate where the USB charging port is attached to the circuit board. Once you have found the port, inspect the state of the soldered leads and resolder any that may be detached. If the USB port is damaged internally, you will need to desolder it completely from the board.

To bypass the faulty USB port, you can attach a new and compatible USB port to the board and carefully solder it in place. This will allow the speaker to charge through the new port instead of the faulty one. Once you have done this, reassemble the speaker and test if it charges properly.

2. Solder the charging wires directly to the board

Another solution is to solder the charging wires directly to the circuit board. This is a permanent link, so it should only be done as a last resort if you do not have a new and compatible USB port to replace the faulty one.

To do this, you will need to disassemble the speaker and locate the faulty USB port. Once you have found the port, desolder it from the board and inspect the circuit board for the “+” and “-” signs. On a USB port, the plus and minus leads are usually located on the far ends of the jack.

After identifying the correct terminals, strip the charger wires and solder them to the board accordingly. Make sure to match the polarity of the wires with the plus and minus signs on the board. Once the wires are soldered in place, reassemble the speaker and test it to see if it is charging properly.

FAQ – Bypass Charging Port on Bluetooth Speaker

Can You Charge a Bluetooth Speaker via an Aux Port?

No, you cannot charge a Bluetooth speaker via an AUX port. The AUX port is only meant to deliver sound to your speaker from an external device, and it cannot receive charging current.

Can You Charge A Bluetooth Speaker’s Battery Directly?

No, you cannot charge a Bluetooth speaker’s battery directly. Any electronic device with a built-in battery needs a special circuit board dedicated to proper battery charging. Charging the battery directly without this special circuit board can risk damaging it and even causing it to explode.