8 Easy Fix For Pyle speaker not working

It’s frustrating when your Pyle speaker isn’t working. You might not know how to fix it, and you may not have the time to take it in for repairs.

The most common reason for a Pyle speaker to stop working is a power issue. Check that the speaker is plugged into an outlet and that the power switch is turned on. If the speaker is still not working, check the batteries. If the batteries are dead, replace them with fresh ones.

If the speaker is still not working, there may be an issue with the audio input. Make sure that the audio cable is firmly plugged into both the speaker and the audio source.

In this post, we’ll provide some tips on how to troubleshoot your Pyle speaker so that you can get it up and running again as quickly as possible.

How to Fix Pyle Speaker Not Working?

1. Check Bluetooth status

Before you perform any other troubleshooting steps, it’s important to make sure that your speaker is properly connected to your device via Bluetooth. To do this, open the Settings menu on your device and find the Bluetooth settings.

Once you’re in the Bluetooth settings menu, make sure that Bluetooth is turned on and that your speaker is listed as one of your connected devices. If your speaker isn’t listed, try restarting both your device and your speaker.

Once they’ve both been restarted, try connecting them again. If your speaker still isn’t appearing in the Bluetooth settings menu, it’s possible that there’s a problem with the speaker itself. In this case, you’ll need to contact the manufacturer for further assistance.

2. Bring Devices Closer

Pyle speakers are designed to provide clear sound at a distance, but if they’re not working properly, it can be difficult to enjoy their full benefits. Fortunately, there are a few things you can try to get your Pyle speakers back up and running.

First, check to make sure that the devices you’re using are compatible with the speakers. Next, make sure that the devices are properly connected and that all of the cables are secure. Finally, bring the devices closer to the speakers.

3. Disconnect other Bluetooth devices

If you experience your Pyle speaker not working as it should, one of the first things you should check is whether there are any other Bluetooth devices connected to your device.

If there are, then disconnect them and try using your speaker again. Sometimes, having too many devices connected to your device can result in poor audio quality or even prevent the devices from working altogether. In addition, make sure that your Pyle speaker is within range of your device.

4. Delete & Rediscover

If your Pyle speaker is not working, it may be due to a problem with the connections. To fix this, you can try deleting and rediscovering the speaker.

First, delete the speaker from the list of devices in your Bluetooth settings. Next, turn off the speaker and then turn it back on. Once it’s turned back on, open the Bluetooth settings on your phone and look for the speaker. When you see it, tap on it to connect.

If this doesn’t work, you can try restarting your phone. Sometimes, a simple reboot can fix problems with Bluetooth connections.

5. Remove devices

If your Pyle speaker is not working, you should check for any devices that may be causing interference. If you have a Bluetooth device or a wireless router near your speaker, try moving it farther away.

If that doesn’t work, try restarting your speaker and your devices. If your speaker still isn’t working, you may need to contact Pyle customer service for assistance. In the meantime, you can try using a different audio source, such as an AUX cable, to see if that works.

6. Update Firmware

Recently, some Pyle speaker users have been reporting that their speakers are not working properly. In most cases, the problem can be traced back to outdated firmware.

Firmware is the software that controls the speaker’s hardware, and it is constantly being updated by the manufacturer to improve performance and fix bugs. If your Pyle speaker is not working properly, you should check to see if there is a new firmware update available.

You can usually find firmware updates on the Pyle website or through a third-party provider. Once you have downloaded the update, follow the instructions to install it on your speaker. After the update has been installed, your speaker should start working properly again.

7. Factory reset your speaker

In most cases, connecting issue can be resolved by resetting the speaker to its factory settings. This process will erase all of the customized settings that have been programmed into the speaker, but it will also clear any errors that might be causing the problem.

To reset your Pyle speaker, first ensure that it is turned off. Then, press and hold the “Reset” button for five seconds. The speaker will emit a beep to indicate that it has been successfully reset.

Once this is done, you can begin setting up your speaker again and enjoy your music without any issues.

8. Check for physical damage

If your Pyle speaker is not working, you should definitely check for physical damage. If the speaker has been dropped or otherwise mishandled, it’s possible that the internal components have become dislodged.

Carefully inspect the speaker to see if anything looks out of place. If you see any damage, try gently nudging the components back into place. If that doesn’t work, you’ll need to take the speaker to a qualified technician for repairs.

In many cases, physical damage is covered by the speaker’s warranty, so be sure to check your paperwork before paying for repairs out of pocket.

Conclusion

If your Pyle speaker isn’t working, the most common reason is a power issue. Check that it’s plugged into an outlet and that the power switch is turned on. If it’s still not working, check the batteries. If they’re dead, replace them with fresh ones.

If there’s still an issue with the audio input, make sure that the audio cable is firmly plugged into both the speaker and the audio source.