Chevy traverse rear speakers not working

There are a number of reasons why your Chevy Traverse rear speaker may not be working.

The most common reason is that the wires connecting the speakers to the head unit are damaged or loose.

In other cases, the head unit itself may malfunctioning. Whatever the reason, here are a few troubleshooting tips that may help you get to the bottom of the problem.

How to fix Chevy Traverse rear speakers not working?

1. Check the Wiring 

One of the most common reasons why car speakers stop working is because the wires connecting them to the head unit are damaged or loose.

Over time, exposure to heat, cold, and moisture can cause these wires to degrade and break down. This is especially true if they are not properly insulated.

To check the wiring, first, make sure that all of the connections are tight.

Then, use a multimeter to test for continuity between the positive and negative terminals on each speaker. If there is no continuity, then you will need to replace the wires. 

2. Check the Head Unit 

Another common reason why car speakers stop working is because the head unit itself is malfunctioning.

To check whether or not this is the case, first make sure that all of the connections between the head unit and the speakers are tight.

Then, turn on the head unit and see if there is any sound coming from it at all. If there is no sound, then you will need to replace the head unit. 

3. Clean The Connections 

If you have checked both the wiring and the head unit and still cannot figure out why your Chevy Traverse rear speaker is not working, then it is likely that there is something wrong with one of the connections between them.

• To clean these connections, first disconnect all of the wires from both the head unit and the speakers.
• Then, use a can of compressed air to blow away any dirt or debris that may be causing problems.
• Finally, reconnect all of your wires and see if that solves the problem. 

How to Diagnose Blown Chevy Traverse Rear Speakers

There are a few telltale signs that your Chevy Traverse rear speakers may be blown. If you’re noticing a crackling sound or distorted audio, it’s worth investigating the issue further. 

Step 1: Physical damage

First things first, take a look at the back of your Chevy Traverse and locate the rear speakers. Once you’ve found them, visually inspect the speaker grilles for any damage.

Next, gently tap on the speaker grilles with your fingers. If you hear a rattling noise, that’s an indication that the speaker cone is damaged and needs to be replaced. 

Step 2: Multimeter

If there’s no visible damage to the speaker grilles, then it’s time to move on to testing the speakers themselves. The best way to do this is with a multimeter.

• First, set the multimeter to “ohm” mode and then touch one of the meter leads to the exposed metal on the back of one of the speakers.
• Touch the other lead of the meter to each of the wires coming out of the speaker (one at a time).
• You should see a reading on the multimeter display that fluctuates between 0 and infinity ohms.
• If you get a reading of infinity ohms or 0 ohms, that means there’s an open circuit or a short circuit in the speaker wire and you’ll need to replace it. 

Step 3: Disconnect the power

If you don’t have a multimeter handy, there’s another way to test for blown speakers.

Simply disconnect the power wire from one of the speakers and then turn on your stereo system. If you still hear audio coming from that speaker, then it’s most likely blown and will need to be replaced. 

Chevy traverse rear speakers are relatively easy to replaced once you’ve diagnosed that they’re blown. 

How many speakers does a Chevy Traverse have?

Chevy Traverse is a vehicle with great sound quality.

It has 10 high performance Bose speakers located throughout the cabin – two in the front, six in the second row, and two in the tailgate – that provide 360-degrees of exceptional audio.

The speakers have a range of frequency response from 75 Hz to 20 kHz and use neodymium motors for precise linearity, clarity and enhanced bass response.

In addition, the system can be customized by adjusting the tone, balance and fade levels. 

How do I unmute my Chevy Traverse rear speakers?

Step 1

First, start by pressing the menu button on the steering wheel side menu control. This will take you to the sound setting page where you’ll see a list of options.

Step 2

Select Vehicle Settings and this will bring up several pages of sound settings. Scroll down to Rear Speaker System and make sure it is set to On or Adjusted.

Step 3

You should now see that the rear speakers have been unmuted, but if not, try adjusting them one notch higher with the arrows next to each of the speaker levels. 

How do you turn the sound up on a Chevy Traverse?

To begin, locate the dashboard knobs in the lower part of the dash. These are the volume, mute and power controls for your car’s audio system.

Turn the knob for volume clockwise to raise the audio level until it is at your desired listening level. If you don’t hear any sound with this adjustment, make sure the mute button was not pushed in by accident.

If all else fails, press and hold down on the power button until it begins flashing; this sequence will reset both audio levels and inputs and should restore sound to your Chevy Traverse.

Conclusion

If your Chevy Traverse rear speaker is not working, then there are a few things you can do to try and fix it yourself.

First, check all of your connections to make sure they are tight.

Next, test for continuity between the positive and negative terminals on each speaker using a multimeter. If there is no continuity, then you will need to replace your wires.

Finally, if you still cannot figure out what is wrong with your speaker, then it is likely that there is something wrong with one of its connections.