Bose Soundbar Keeps Cutting Out (Fixed)
There is no other Soundbar that has the same sound as the Bose soundbar. When it keeps cutting audio sound, it can be a real disappointment. But it is very easy to fix them.
The Bose Soundbar keeps cutting out audio due to some minor issues you can check it at home. It might be due to a poorly connected cable, or outdated firmware, and the main cause is the resetting issue.
In this article, you will know why your Bose soundbar keeps cutting out and how you can fix it. Read the article step by step and solve your Bose soundbar problem.
How to Fix Bose Soundbar Keeps Cutting Out
Poorly connected cables
Sometimes the audio cables might be trouble in sound audio that why your Bose soundbar keeps cutting out. Check the audio cable and whether it is properly plugged into the device port.
Maybe there is dirt or debris in the port of the device or it is faulty for connection.
First, clean the dirt from the ports of Bose soundbar and another device. However, if you think that the port is faulty, then you can plug the port into another port.
And also check your audio cable maybe it is not compatible with your specific device.
For checking the current audio cable you can plug another cable into the port. If the other cable is fine for the Boss soundbar then change the audio cable.
Remove previous devices
If your Bose Soundbar keeps cutting audio then you need to delete the Bluetooth history of your Bose Soundbar and your device.
Sometimes old Bluetooth history interferes between Bose soundbar and your device. As result, Bose soundbar sound begins to cut out.
After clearing the history, connect the Bose soundbar with the TV.
If after removing the previous device your Bose Soundbar does not properly work then move on to the next step that is very useful for you.
Outdated firmware
If the Bose Soundbar keeps cutting out the audio it needs to upgrade to the new version of the Firmware.
All the minor issues will be fixed after downloading the new firmware version. If the firmware is outdated, your Bose Soundbar may have difficulty establishing connections.
To upgrade the new version of your Bose soundbar firmware follows the below steps.
- Pick up the remote control then press and hold the music button for 10 seconds.
- The music button is on the left side of the TV button.
- After 10 seconds the white light will flash around the light bar of your Bose Soundbar. The Bose soundbar will start to download the new version of the firmware and automatically install it on the device.
- After completing the process the Bose Soundbar will reboot.
Old components
Bose Soundbar keeps cutting audio due to faulty components. Mostly these problems are in old Bose soundbars due to long time use.
After a time its components start to wear out. This is not a big issue it is an electronic device and all electronic devices have some minor issues.
The resistor, capacitor, and the circuit start to wear out due to over-time uses, and other components in the Bose Soundbar burn out.
Therefore the soundbar keeps cutting audio and other connections. You should need to go to the electronic technician to replace the faulty components and resolve the issue.
It is a budget-friendly deal for good audio results.
Or you can purchase the new Boss soundbar if you cannot go to the technician.
Reset Bose soundbar
Bose Soundbar keeps cutting in audio sound and fails to connect with other devices.
Also, the soundbar not turning ON and OFF and the sound quality issue are some other common problems. Resetting will eradicate these minor problems from your Bose soundbar.
You can resolve all the issues by resetting your Bose Soundbar. After resetting all the old saved data will remove and your Bose Soundbar will back to the factory default.
For resetting the Bose Soundbar follow the below steps.
- In the first step, press the Sound Touch button of your Bose soundbar remote.
- Secondly, press and hold the Teletext button (for Bose soundbar 300) or Play button and volume down button (for all Bose soundbars) for 15 seconds at the same time.
- All lights will be blinking on the indicator of the Bose Soundbar that’s mean your device will reset.
- The soundbar will reboot.
