Anker Soundcore volume problem – Explained for Beginners

Anker Soundcore is a popular portable speaker that offers great sound quality and portability. However, some users have reported that the speaker has a volume problem, whereby the sound is not as loud as it should be.

It is likely that this problem is due to low battery levels. When the battery is low, the speaker will automatically reduce the volume in order to conserve power. Therefore, if you are experiencing this problem, it is recommended that you charge the speaker’s battery.

Once the battery is fully charged, the volume should return to normal. If the problem persists, then there may be an issue with the speaker itself and you should contact Anker customer support for further assistance.

How do I change the volume on my Anker Soundcore?

If you need to adjust the volume on your Anker Soundcore, there are a few different ways to do so.

Through speaker

The easiest way is to use the physical buttons on the speaker itself. There are plus and minus symbols that correspond to increasing or decreasing the volume.

Through connected device

You can also use the buttons on your Bluetooth device if it is connected to the speaker. If you have the Soundcore app installed on your phone, you can use that to adjust the volume as well. Simply open the app and find the volume control.

Through Echo device

Finally, if you have an Echo device, you can use voice commands to adjust the volume on your Anker Soundcore. Just say “Alexa, turn up the volume” or “Alexa, turn down the volume.” Whichever method you use, it’s easy to change the volume on your Anker Soundcore.

Possible solutions for Anker Soundcore volume problem

Here are some possible solutions for Anker Soundcore volume problem:

1. Reset the speaker

If you’re having trouble with your Anker Soundcore speaker’s volume, there’s a good chance that the speaker itself is not to blame. More often than not, the issue lies in the connection between the speaker and your device. Thankfully, resetting your speaker is a quick and easy way to fix this problem. Here’s what you need to do:

1. Locate the reset button on your Anker Soundcore speaker. This button is usually located on the bottom or rear of the unit.

2. Press and hold the reset button for 3-5 seconds.

3. Reconnect your Anker Soundcore speaker to your device. The volume should now be working properly.

If you’re still having trouble with the volume, try restarting your device. In most cases, this will solve the problem.

2. Connect Anker Soundcore with another device

If you’re having trouble with your Anker Soundcore not pumping out enough volume, there are a few things you can try.

First, check to see if the volume on your device is turned all the way up. If it is, then try connecting your Soundcore to another device.

In some cases, the volume problem may be due to a compatibility issue between the Soundcore and your original device. Connecting to a different device can help you rule out this possibility. Lastly, if none of these solutions work, you can always contact Anker customer support for assistance.

3. Try a different audio source

If other solutions didn’t work for you and you’re still not getting any sound, try a different audio source.

If you’re using an iPhone, for example, try playing music from your iTunes library instead of streaming from Spotify. If you’re using an Android phone, try a different music app altogether.

4. Turn the volume up

If you’re having trouble hearing your Anker Soundcore speaker, there are a few things you can try to fix the volume problem.

Check to make sure that the volume on both the speaker and the device it’s connected to is turned up all the way. Sometimes, one or the other can be turned down without you realizing it.

If that doesn’t work, try restarting both the speaker and the device. If that still doesn’t fix the problem, there may be something wrong with the speaker itself and you’ll need to contact customer service for assistance.

5. Use aux cable

If you’re having trouble getting your Anker Soundcore speaker to play at full volume over a Bluetooth connection, there’s an easy fix: just connect it using an aux cable instead.

For some reason, the Soundcore seems to output less power when it’s connected wirelessly, which can result in lower volume levels. However, connecting it directly with an aux cable bypasses this issue and allows the speaker to reach its full potential.

So if you’re looking for a quick and easy way to boost your Soundcore’s volume, simply switch to an aux connection.

6. Keep the devices in close range

Anker Soundcore is a great way to enjoy music on the go. However, users have reported problems with the volume level of the device, particularly when used in conjunction with other devices.

One way to fix this problem is to keep the Anker Soundcore within range of the other devices. This will help to ensure that the sound is properly synchronized and that the volume level is consistent.

This will also help to maintain a consistent volume level and prevent any echoing or dropouts.

7. Limit the use of Bluetooth devices

Another way to resolve this issue is to limit the use of Bluetooth devices near the speaker. This will minimize interference and allow the speaker to function at its full potential.

Additionally, it is important to make sure that the Bluetooth devices are properly paired with the speaker. Otherwise, they may not be able to connect properly, which can also affect sound quality.

By following these simple tips, you can enjoy the best possible sound quality from your Anker Soundcore speaker.

Conclusion

Though the problem of low sound volume is a common one with Anker Soundcore, there is no need to worry. The simple solution is to ensure that your speaker has enough battery charge. By following the above-mentioned steps, you can easily fix the low sound output issue on your Anker Soundcore speaker.