Fix Anker Soundcore keeps disconnecting – Easy Guide

One of the most frustrating things about Bluetooth speakers is when they keep disconnecting. If you’re wondering why your Anker Soundcore keeps disconnecting, it’s likely because the speaker is paired to multiple devices.

While this may not be a problem if you only ever use one device at a time, it can be quite annoying if you have multiple devices that you want to use with your speaker.

The good news is that there is a relatively simple fix for this problem. All you need to do is unpair all of the devices except for the one that you want to use with your speaker. This will ensure that your speaker stays connected to the device that you’re using and doesn’t keep disconnecting.

In this blog post, we’ll be discussing the best way to keep your Anker soundcore from disconnecting. We’ll also be providing a simple fix for the problem.

Why Anker Soundcore keeps disconnecting?

One of the most frustrating things about wireless speakers is when they keep disconnecting. If you’re having this problem with your Anker Soundcore, it’s most likely because your device is out of the range of the speaker.

The Bluetooth range on most speakers is about 40 feet, so if you’re farther away than that, your device will probably start to disconnect. You can try moving closer to the speaker, or you can try resetting the speaker by turning it off and then back on again.

If neither of those solutions work, you may need to contact Anker customer service for further assistance.

Other possible fix for Anker Soundcore keeps disconnecting

Here are some possible fix for this issue:

1. Keep in close proximity

Some users have reported that their Anker soundcore keeps disconnecting after a few minutes of use. There are a few potential reasons for this issue.

First, make sure that the distance between your speaker and your device is not greater than 40 feet. If it is, try moving the speaker closer to your device. Additionally, make sure that there are no interfering objects between your speaker and your device.

This includes things like walls and furniture. Finally, check to see if there are any updates available for your speaker. If so, be sure to install them. By following these steps, you should be able to fix the issue with your Anker soundcore.

2. Avoid interference from electronic devices

While electronic devices have made our lives more convenient in many ways, they can also be a source of frustration. One common problem is interference from other devices, which can cause everything from dropped calls to lost files.

In the case of audio devices, such as the Anker Soundcore, interference can manifest itself as a crackling sound or constant disconnection. Luckily, there are a few simple steps you can take to reduce interference and keep your audio quality clear.

First, try to keep your device away from other electronic devices. If that’s not possible, try to minimize the number of devices that are turned on and in use at the same time. You can also try turning off Bluetooth on any devices that you’re not using.

By taking these simple steps, you can help to reduce interference and ensure that your audio quality is clear.

3. Reset Bluetooth connection

Is your Anker soundcore keeps disconnecting? If so, don’t worry–it’s a fairly common issue that can usually be fixed by resetting the bluetooth connection.

Here’s how to do it: first, turn off the soundcore and the bluetooth device it was previously paired with. Then, turn on the soundcore and put it into pairing mode (the light will flash blue and red).

Finally, connect the soundcore to the Bluetooth device you want to use it with. If successful, the light will stop flashing and stay solid blue. So if your Anker soundcore keeps disconnecting, give this method a try–it should do the trick!

4. Reset the speaker

The good news is that resetting a speaker is pretty easy in Anker Soundcore speaker. First, make sure that the speaker is turned off. Next, press and hold the power button for 10 seconds.

The speaker will flash a few times to indicate that it has been reset. Once it has finished flashing, the speaker should connect to your device and function properly.

If you are still having issues, try connecting the speaker to a different device or restarting your phone or tablet. With a little troubleshooting, you should be able to get your Anker Soundcore speaker working correctly again in no time.

5. Try another device

Have you ever been in the middle of a great song, only to have the music cut out because your headphones disconnected? It’s frustrating, to say the least.

If you’re using Anker Soundcore earbuds, you may have noticed that they tend to disconnect often. Fortunately, there’s an easy fix for this problem.

Simply try connecting another device to your Anker Soundcore earbuds. If they stay connected, then the issue is with your original device. If they still disconnect, then the problem lies with the earbuds themselves.

Either way, this simple troubleshooting tip should help you get to the bottom of the issue so that you can enjoy your music without interruption.

6. Low battery

Anker is a company that makes some of the best portable chargers and Bluetooth speakers on the market. However, recently, many users have been having issues with their Anker soundcore keeps disconnecting.

Thankfully, there is an easy fix for this problem. simply charge your battery to 100% and then unplug it from the charger. Next, turn off your Bluetooth speaker and wait for 30 seconds. After 30 seconds have passed, turn your speaker back on and it should connect to your devices without any issues.

If you are still having problems, you can try resetting your Bluetooth connection or updating the firmware on your speaker.

Conclusion

If you’re having trouble with your Anker Soundcore disconnecting, the likely culprit is that the speaker is paired to multiple devices. The good news is that there’s a simple fix for this problem – just unpair all of the devices except for the one you want to use with your speaker. This will ensure that your speaker stays connected to the device you’re using and doesn’t keep disconnecting.