6 Easy Ways To Fix Anker Soundcore boost not charging

Anker is a well-known name in the world of charging cables, and their Soundcore Boost cable is no exception. However, some users have reported that their Soundcore Boost is not charging.

The cause of this issue appears to be a faulty charging cable. If you are having this problem, the first thing you should do is check the cable for any damage. If the cable is damaged, it will need to be replaced.

If the cable is not damaged, then the next step is to try plugging the Soundcore Boost into a different outlet. Sometimes, a loose connection can cause charging issues.

If none of these steps work, then you may need to contact Anker customer service for further assistance.

How to fix Anker Soundcore boots not charging?

1. Perform a factory reset

If your Anker Soundcore boost is not charging, it might be time to perform a factory reset. This will clear any saved settings and restore the speaker to its default state.

To do this, hold down the power button and the volume down button simultaneously for 10 seconds. The speaker will then enter into factory reset mode and will restart itself.

Once it has restarted, you should then be able to charge it normally. If you’re still having trouble, you can contact Anker customer support for further assistance.

2. Remove Dirt present in the charging port 

One of the most common issues faced by Anker Soundcore boost users is that the device does not charge. In most cases, this problem can be fixed by simply removing the dirt present in the charging port.

To do this, turn off your Soundcore boost and disconnect the charging cable. Use a small brush or toothpick to remove any dirt or debris from the charging port. Once the port is clean, reconnect the cable and try charging the device again.

If your Soundcore boost still doesn’t charge, then there may be a more serious issue with the device and you should contact Anker customer support for further assistance.

3. Try using a different charging cable

If the above solution didn’t work for you, you can try other things to fix the Anker Soundcore boost not charging issue.

 One option is to use a different charging cable. If the problem is with the cable, then using a different one may fix the issue. Another option is to try charging the speaker from a different outlet. This will help to rule out any problems with the outlet that you are using. 

Finally, if neither of these solutions fixes the problem, then you may need to contact customer support for assistance. Whatever the cause of your Anker Soundcore boost not charging, there are a few potential solutions that you can try.

4. Try using a different power adapter

If your Anker Soundcore boost is not charging, one possible solution is to try a different power adapter. The adapter that comes with the speaker is designed for use with standard household outlets, but it may not work with all types of outlets.

If you’re using the speaker in an RV or boat, for example, you may need to use a different adapter. You can also check the power cord to make sure it’s properly plugged into the speaker and the outlet. If the cord is loose or damaged, it may be preventing the speaker from charging.

If you’ve tried all of these solutions and the speaker still isn’t charging, you may need to contact Anker customer service for further assistance.

5. Replace defective battery

If your Anker Soundcore boost is not charging, it may be due to a defective battery.

To fix this problem, you will need to replace the battery with a new one. The best way to do this is to purchase a replacement battery from Anker. Once you have the new battery, simply remove the old one and install the new one in its place.

Be sure to follow the instructions that come with the new battery to ensure proper installation. With a new battery installed, your Anker Soundcore boost should charge properly and provide you with many hours of listening pleasure.

6. Defective circuit board

If your Anker Soundcore boost isn’t charging, it might be due to a defective circuit board. Fortunately, this is a relatively easy fix that you can do at home.

First, identify the defective circuit board. This is usually the board closest to the power source. Next, remove the screws that hold the board in place. Be careful not to damage any of the other components as you remove the screws.

Once the screws are removed, gently pull out the defective board and replace it with a new one. Finally, screw the new board in place and reassemble the speaker. With any luck, your Anker Soundcore boost will now charge properly.

Conclusion

Anker is a well-known name in the world of charging cables, and their Soundcore Boost cable is no exception.

However, some users have reported that their Soundcore Boost is not charging.

The cause of this issue appears to be a faulty charging cable. If you are having this problem, the first thing you should do is check the cable for any damage. If the cable is damaged, it will need to be replaced.

If the cable is not damaged, then the next step is to try plugging the Soundcore Boost into a different outlet. Sometimes, a loose connection can cause charging issues.