6 Easy Fix For Anker Soundcore 2 not charging

Anker is one of the most popular brands when it comes to Soundcore 2. The company offers high-quality products at an affordable price. However, some users have reported that their Anker Soundcore 2 is not charging.

In most cases, this is due to a faulty or damaged cable. If you are using the incorrect type of cable, it can cause a number of problems, including decreased charging speed or even damage to the Soundcore 2.

To avoid this, be sure to use only the official Anker charging cable. Additionally, make sure that the cable is properly inserted into the soundcore 2 and the power outlet. If you are still having trouble, try contacting Anker customer support for further assistance.

How to fix Anker Soundcore 2 not charging?

1. Perform a factory reset

Soundcore 2 not charging can be a real pain. If you’ve tried all the obvious things like restarting your device or making sure that it’s turned on and plugged in, then it might be time to try a factory reset.

This will erase all your data and settings, so make sure to back everything up first. To do a factory reset, start by pressing and holding the Power button for 8 seconds. Next, press and hold the Bluetooth button for 2 seconds. 

If doing a factory reset doesn’t fix the problem, it’s possible that the charging port on your speaker is damaged and will need to be replaced. You can also try using a different charger or USB cable to see if that makes a difference.

2. Try using a different USB cable

If you’re having trouble charging your Anker Soundcore 2, there are a few things you can try.

First, make sure you’re using the included USB cable—some aftermarket cables don’t work as well. If that doesn’t help, try plugging the speaker into a different USB port. Secondly, try using a different USB cable. If that doesn’t work, try connecting the speaker to a different power source, such as a laptop or tablet.

If the speaker still won’t charge, there may be an issue with the internal battery. In this case, you’ll need to contact Anker customer support for further assistance.

3. Try using a different charger

If your Anker Soundcore 2 is not charging, you should try using a different charger. If you are using the charger that came with your device, try using a different one.

If you have another device with a USB-C port, try plugging the Anker Soundcore 2 into that device. If the Anker Soundcore 2 charges when plugged into another device, then the problem is most likely with the charger.

And if the Anker Soundcore 2 does not charge when plugged into another device, then the problem is most likely with the Anker Soundcore 2 itself.

4. Clean Dirt present in the charging port

If you’re still having trouble charging your Anker Soundcore 2 speaker, you can try cleaning your charging port.

First, take a look at the charging port and make sure it’s clean. If there’s any dirt or debris present, use a toothpick or other small tool to gently remove it. Once the port is clean, try plugging the charger in again. If the speaker still doesn’t charge, try using a different USB cable.

In some cases, the original cable that comes with the speaker may not be compatible with your charger.

5. Defective battery

If your Anker Soundcore 2 Bluetooth speaker is not charging, you should check the battery. If the battery is defective, it will need to be replaced. You can purchase a replacement battery from Anker’s website or from a third-party retailer.

Once you have a replacement battery, simply follow the instructions in the user manual to replace the old one. If the problem persists after replacing the battery, it is likely that there is an issue with the charging port.

The port can become damaged or blocked, preventing the charging cable from making a good connection. To clean the charging port, read the 4th point in this blog post.

6. Defective circuit board

If you’re still having trouble charging your Anker Soundcore 2, it’s likely due to a defective circuit board. To fix this, you’ll need to replace the circuit board. This is a relatively easy repair that can be completed in just a few minutes.

• First, remove the back cover of the speaker.
• Next, locate the circuit board and carefully remove it.
• Once the old board is out, inserting the new one is simply a matter of reversing the process.
• Be sure to line up the connections correctly before soldering them in place.
• With the new circuit board in place, reattach the back cover and you should be good to go!

How do you charge a Bluetooth speaker if the charging port is broken? 

In order to charge a Bluetooth speaker if the charging port is broken, you will need to use the USB cable and connect it to your smartphone. Once it is connected, you will then need to turn on the speaker and wait for the LED light to turn on.

Once the LED light is on, you can then proceed to charge your speaker by holding down the power button for three seconds. After the three seconds have passed, you can then release the power button and your speaker should begin charging.

It is important to note that you should only charge your speaker for about two hours at a time in order to prevent overcharging and damaging the battery. Additionally, you should also make sure that the USB cable is properly plugged into both the speaker and your smartphone before beginning the charging process.

Conclusion

Anker is a well-known and trusted brand for soundcore 2 products. If you are experiencing charging issues with your soundcore 2, the first thing to check is the cable.

Make sure that you are using an official Anker charging cable and that it is properly inserted into both the soundcore 2 and the power outlet. If you are still having trouble, contact customer support for further assistance.