7 Quick Fix For Kenwood rear speakers not working

Are you frustrated by a lack of sound from your Kenwood rear speakers? Don’t worry, you’re not alone! Rear speaker issues are a common problem for car audio enthusiasts, but the good news is that there are often simple solutions.

In this post, we’ll go over 7 quick fixes that you can try to get your Kenwood rear speakers working again in no time.

Whether it’s a simple wiring issue or a problem with the head unit, one of these solutions is sure to get your music pumping through all of your speakers again. So let’s get started!

How to fix the Kenwood rear speakers not working

1. Check for Power 

When dealing with Kenwood rear speakers not working, the first thing to do is check for power. Start by ensuring there is power going to each speaker.

To check this, you can use a multimeter or a test light. Once confirmed that power is reaching the speakers, move on to diagnosing the other potential issues causing them not to work.

If the power source turns out to be the issue, it may require some electrical knowledge in order to fix it correctly and safely. Make sure you have a full understanding of what needs to be done before attempting any type of repair.

2. Check for Continuity 

Fixing the Kenwood rear speakers that are not working can be a breeze if one systematically checks for continuity.

To start, inspect all of the wiring in the car and look for any disconnected cables or wires. If everything looks OK, then test the speakers with a multimeter to find any breaks in continuity and ensure that proper voltage is passing through them.

If you do not have a multimeter, you will need to invest in one before being able to check for continuity.

After you’ve checked all of the wiring and tested the speakers, any persistent issues could require more technical repair work from a qualified individual – which may even involve replacing parts of your audio system entirely.

3. Replace Speakers 

Trying to fix the Kenwood rear speakers not working? Replacing the speakers might just do the trick! It is easy enough to identify a speaker that will work and fit in your particular model.

Start by finding out the right size of speaker—use a ruler or measuring tape to measure the height, width, depth, and mounting points of your existing ones. Then go online and shop around for compatible replacements.

Finally, consider if you wish to buy from an authorized supplier or look for a better deal from an independent seller. Doing this will ensure you get top-notch parts for your repair job without breaking the bank.

4. Inspect the Wiring

Faulty wiring can be a major cause of your Kenwood rear speakers not working. Make sure to inspect the wiring regularly for any damaged or broken components, such as loose connections or frayed cords.

Check the cables that connect the receiver and amplifier, if you have one, for any signs of corrosion before inspecting the wiring of your Kenwood rear speakers.

If these simple checks don’t reveal the problem, then it’s worth consulting with a car audio specialist who can advise on other possible causes.

5. Replacing Fuses

Replacing fuses is a good fix when troubleshooting the Kenwood rear speakers not working in your car. This fix can often be accomplished in just a few moments and involves very simple tools.

Start by removing the plastic or metal cover over the fuse box, typically located near the car’s battery. In the fuse box, identify which fuses correspond to your rear speakers and remove them, one at a time.

Replace each fuse with one of the same size and rating that came in the package connecting it back into the original location. After all fuses have been replaced, turn up the volume of your radio and test if your Kenwood rear speakers are functioning properly.

6. Checking for Audio Settings Issues

If your Kenwood rear speakers have stopped working and can’t seem to be fixed, the most likely culprit is a sound setting issue.

You should first try to crank up the rear speaker volume level in the audio settings menu – this is typically found in the head unit’s menu system accessed through a button on the Kenwood receiver.

Make sure it isn’t muted and was accidently turned down or off. You should also double-check active fader settings, as these sometimes are left incorrect when adjusting balance adjustment settings.

7. Check for Dirt and debris inside the speaker

To fix the Kenwood rear speakers not working, checking inside the speaker for dirt and debris can be a good fix.

Different types of debris can cause a speaker to malfunction or stop working altogether, so this could potentially solve the problem quickly and easily.

To inspect the speaker properly, be sure to power down your device before opening it. After taking off the back cover of your device, carefully check each component for foreign materials that may have made their way in over time.

This can include dust, bits of paper or fabric, insects, and more. Once you’ve identified any potential issues inside the speaker, use a soft cloth to wipe out what isn’t supposed to be there.

How to Diagnose Kenwood rear speakers not working

Have you ever had the issue of your Kenwood rear speakers not working? This can be a frustrating problem but luckily, there are ways to diagnose the issue and get your speakers back up and running again. Let’s break down how you can troubleshoot this common speaker problem for yourself. 

Step 1: Disconnect the Speaker

First, power off the receiver and disconnect the speaker from the back of the unit. Make sure all connections are secure with no loose wires or plugs.

Take note of what type of connection is on your particular model in order to reconnect it properly when done troubleshooting. 

Step 2: Check the Speaker for Vibration

Next, place your finger firmly on the center of each speaker cone and turn on your receiver/amp.

If you feel any vibration as sound comes through, then this means that there is no issue with your wiring or connection but rather a broken speaker diaphragm or voice coil within the speaker itself. Turn off power before proceeding to step 3. 

Step 3: Check the Speaker with a Multimeter

To test if either your positive or negative wire has broken internally, use a multimeter to check voltage output and continuity across both wires inside of each speaker terminal post.

If there is no continuity, then this confirms that one or more of these wires have broken internally. If so, it may be time to purchase new rear speakers for your Kenwood system. 

Step 4: Determine Amount Damage

Before purchasing new speakers, take some time to examine how much damage has been done to each speaker component (i.e., diaphragm, voice coils).

If only one component is damaged then it may be more cost-effective to replace just that component instead of buying an entire new set of rear speakers for your Kenwood system.

Conclusion

By following these tips, you should be able to get your Kenwood rear speakers up and running in no time. As always, if you have any questions or concerns, feel free to reach out to a professional for help. In the meantime, enjoy your newly fixed audio system!

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *