11 Quick Steps to fix Tribit speaker not Charging Issues

The Tribit portable Bluetooth speaker is a great choice for outdoor activities, offering high-quality sound and convenient features like Bluetooth connectivity, a built-in microphone, and a long-lasting 24-hour battery.

However, some users may encounter an issue where the speaker does not charge when connected to a charger. If you’re experiencing this issue, don’t worry!

This article will provide detailed troubleshooting steps to help fix the problem and get your speaker up and running again.

Table of Contents

Step 1: Check the Charging Cable

Before attempting any other troubleshooting steps, make sure that the charging cable is not damaged and is securely connected to both the speaker and the charger. If the cable is damaged or not properly connected, the speaker will not charge.

Step 2: Reset Factory Settings

If the charging issue is due to a software glitch, resetting the factory settings may resolve the problem. To reset the factory settings on your Tribit speaker, press and hold the volume + and volume – buttons simultaneously for 5 seconds. This will restore the speaker to its default settings.

Step 3: Clean the Charging Port

Dust and debris can accumulate in the charging port and prevent the speaker from charging properly. Use a toothpick or blow air into the charging port to remove any dust or debris that may be blocking the connection.

Step 4: Try a Different Charger and Wall Outlet

It’s possible that the charging issue may be caused by a faulty charger or wall outlet. Try using a different charger and outlet to see if that resolves the problem. If the speaker charges properly with the new charger and outlet, the issue was likely caused by the old charger or outlet. If the issue persists, continue to the next step.

Step 5: Check for a Faulty Battery

A faulty battery may be causing the charging issue. This may be due to overcharging or prolonged exposure to heat. To check the battery, try charging the speaker with a different charger and outlet as described in Step 4. If the speaker still does not charge, the battery may need to be replaced.

Step 6: Check for Water Damage

If the speaker has been exposed to water, the internal circuit may be malfunctioning and will need to be repaired at a brand-approved facility. Water damage is not covered under the speaker’s warranty, so it’s important to keep the speaker dry to avoid this type of issue.

Step 7: Check for a Faulty Charger

If you’ve tried using a different charger and outlet as described in Step 4 and the speaker still won’t charge, the charger itself may be faulty. Try using the charger to charge another device to see if it is functioning properly. If the charger doesn’t work with any devices, it will need to be replaced.

Step 8: Check the Speaker’s Firmware

If the speaker’s firmware is out of date, it may prevent the speaker from charging properly. To check if there is a firmware update available, visit the Tribit website or check the user manual for instructions. If a firmware update is available, follow the instructions provided to install it.

Step 9: Check the Speaker’s Battery Management System

Some speakers have a battery management system that can prevent the speaker from charging if the battery is damaged or not functioning properly. If you suspect that the battery management system may be causing the charging issue, try resetting it by following the instructions provided in the user manual.

Step 10: Check the Speaker’s Charge Cycle

If the speaker has been charged and discharged many times, it may be at the end of its charge cycle. When a speaker’s battery reaches the end of its charge cycle, it may no longer hold a charge or may charge very slowly. In this case, replacing the battery may be necessary.

Step 11: Check for Physical Damage

If the speaker has been dropped or subjected to physical trauma, the charging port or other internal components may be damaged. In this case, the speaker will need to be repaired or replaced. If you suspect that physical damage may be causing the charging issue, it is recommended to take the speaker to a brand-approved repair facility for assessment.

How to extend the battery life of your Tribit speaker

Avoid exposing the speaker to extreme temperatures, as this can damage the battery.
Don’t leave the speaker in the charger for prolonged periods of time, as overcharging can also damage the battery.
Turn off the speaker when not in use to conserve battery life.
Keep the speaker dry to avoid water damage, which can also harm the battery.

FAQ – Tribit speaker not charging

1. How can I reset my Tribit speaker?

To reset the factory settings on your Tribit speaker, press and hold the volume + and volume – buttons simultaneously for 5 seconds. This will restore the speaker to its default settings.

2. How long does it take for the Tribit speaker to charge?

The Tribit speaker takes approximately 3-4 hours to fully charge when using a 5V/1A charger. Using a charger with a higher voltage may shorten the charging time, but it is not recommended as it may damage the speaker or shorten the battery’s lifespan.

3. Is the battery in Bluetooth speakers replaceable?

In some cases, the battery in a Bluetooth speaker may be replaceable. It’s best to refer to the user manual or contact the manufacturer for more information on whether the battery in your specific model is replaceable and how to replace it if necessary.

4. How do I know if my Tribit speaker is charging?

To know if your Tribit speaker is charging, check the light on the speaker. While it’s charging, the light will be solid red. When it’s fully charged, the light will turn blue. According to the manufacturer’s leaflet, the battery charge time is 5 hours and the music playing time is up to 24 hours.

5. Why is my Tribit speaker not working?

If your Tribit speaker is not working, you can try resetting it by pressing and holding the Volume + and Volume buttons simultaneously for 5 seconds. This will reset the speaker and remove the old pairing in your Bluetooth device, allowing you to pair the speaker again. This may fix any issues you are experiencing with the speaker.

6. How do I claim my Tribit warranty?

To claim your Tribit warranty, you can contact OneAssist through their app, website, or 24-hour helpline at 1800 123 3330. Provide your registered mobile number or membership ID, and OneAssist will take care of the rest. This service is available 24 hours a day, 7 days a week, 365 days a year.

7. Is Tribit a Chinese brand?

No, Tribit is not a Chinese brand. Tribit Technologies Private Limited is an Indian Non-Government Company.

8. Is Tribit a good speaker?

The Tribit StormBox Micro Bluetooth speaker is a good speaker due to its portability, durability, and strong bass sound profile. Its IP67 rating makes it suitable for outdoor use, and it’s affordable for its quality. You can also pair two of these speakers together for stereo audio, making it a great choice for anyone with an appreciation for bass.

Conclusion

In summary, if you’re experiencing charging issues with your Tribit portable Bluetooth speaker, try checking the charging cable, reset the factory settings, cleaning the charging port, using a different charger and outlet, checking for a faulty battery, and checking for water damage.

If the issue persists after trying these steps, it is recommended to contact the manufacturer or a brand-approved repair facility for further assistance.

Don’t forget to refer to the user manual or contact the manufacturer for more specific troubleshooting steps or information on the speaker’s warranty.