10 Easy Fix for Harman Kardon Speaker not Charging
Are you tired of constantly having to charge your Harman Kardon speaker? Are you frustrated by unexpected battery drains and charging issues?
Look no further, as we dive deep into the common causes of charging problems and provide easy solutions to keep your speaker charged and ready for your next listening session.
From battery issues to power source problems, we’ve got you covered. So, sit back, relax and prepare to learn how to keep your speaker’s battery life at its peak performance.
How to fix Harman Kardon Speaker not Charging
1. Problem with the battery
Cause: Over time, the battery in your speaker may lose its ability to hold a charge or may become damaged, preventing it from charging at all.
Fix: Try charging the speaker for a longer period of time, or consider replacing the battery if it is no longer holding a charge. It is important to note that the battery life of a speaker is limited and will degrade over time. This is normal and expected. If the battery is no longer holding a charge, it may be time to replace it.
2. Problem with the charging cable
Cause: The cable may be frayed, broken, or not properly connected to the speaker or power source.
Fix: Check the charging cable and ensure that it is properly connected to both the speaker and the power source. Make sure that the cable is not damaged or frayed. Replace the cable if necessary. It is also a good idea to use the cable that came with your speaker, as other cables may not provide the correct voltage or amperage to charge the speaker properly.
3. Power source issues
Cause: The outlet or USB port that the speaker is plugged into may be malfunctioning.
Fix: Try a different outlet or USB port and make sure that the power source is working properly. If you are using a USB port to charge your speaker, try a different USB port or plug the cable into a wall adapter. If the speaker is still not charging, it’s possible that there is an issue with the power source.
4. Software conflicts
Cause: The speaker’s software may be conflicting with the charging process.
Fix: Try resetting the speaker to see if that resolves the issue. To reset your Harman Kardon speaker, press and hold the power button for 10 seconds. The speaker will turn off, then turn back on by itself. Release the power button and wait for the speaker to fully restart before trying to charge it again.
5. Firmware issues
Cause: The speaker’s firmware may be out of date or causing issues with the charging process.
Fix: Check for firmware updates and install any available updates. Firmware updates can often fix charging issues or other bugs. To check for firmware updates, connect your speaker to your computer or mobile device and visit the Harman Kardon website to check for updates.
6. Battery is not calibrated
Cause: Battery may not be calibrated properly which can cause charging issues
Fix: Try calibrating the battery by performing a full discharge and full charge cycle. This can be done by fully discharging the speaker by playing music until the speaker turns off, then charging it fully and repeating the process one or two times.
7. Charging port is dirty
Cause: Charging port may have dust or debris build-up which can cause charging issues
Fix: Clean the charging port with a small brush or compressed air. Make sure to remove any dust or debris that may be blocking the charging port.
8. Power adaptor not providing enough power
Cause: The power adaptor may not be providing enough power to charge the speaker
Fix: Try using a different power adaptor or check the power rating of the adaptor and ensure it matches the speaker’s requirements. It is also recommended to use the original power adaptor that came with your speaker, as using a different adaptor may not provide the correct voltage or amperage required to charge the speaker properly.
9. Battery is swollen
Cause: Swelling of battery can occur due to overcharging, overheating or other reasons
Fix: Stop using the speaker and take it to a professional for further troubleshooting. A swollen battery can be a serious safety hazard and should not be used or handled by non-professionals.
10. Speaker’s internal hardware is damaged
Cause: Internal hardware components of speaker may be damaged which can cause charging issues
Fix: Take the speaker to a professional for further troubleshooting. Internal hardware damage can be caused by various factors such as physical damage, water damage, or power surge. A professional will be able to diagnose and repair the issue.
How do I reset my Harman Kardon speaker?
To perform a hard reset on your Harman Kardon Onyx Studio 6 speaker, connect it with your Android smartphone and turn it on.
Click and hold on the Bluetooth button and the volume up button together until the indicator powers off and a notification sound is heard. Release the buttons and tap on the power button to power on the speaker.
The speaker will automatically enter into Bluetooth pairing mode, which means all settings have been restored and all previously connected devices have been deleted from the speaker. This method is simple and effective to reset your Harman Kardon speaker.
Wrapping up
In conclusion, if your Harman Kardon speaker is not charging, it could be caused by a variety of factors. By identifying the cause of the issue and following the corresponding fix outlined in this post, you should be able to resolve most charging issues.
However, if you have tried all of these troubleshooting steps and are still experiencing problems, it is recommended to reach out to Harman Kardon customer support or take the speaker to a professional for further assistance.
It is important to note that some causes such as a swollen battery or internal hardware damage may require professional help and should not be attempted to fix by non-professionals.
FAQ – Harman Kardon speaker not charging
How do I know if my Harman Kardon speaker is charging?
To know if your Harman Kardon ONYX Studio 2 is charging, observe the power button. It will flash at 1 sec intervals when the speaker is charging with the power on, and will stop flashing when the speaker is fully charged.
Can you charge a Harman Kardon with a USB?
No, you cannot charge a Harman Kardon speaker using a USB port. The micro USB port on the speaker is only used by quality control personnel and is not meant for charging the speaker. The speaker must be charged using the AC adapter with power cord that came with the speaker.
How long does a Harman Kardon take to charge?
A Harman Kardon Onyx Studio takes 5 hours to fully charge. The battery life of the speaker is up to 8 hours depending on music volume and content.
